58MM 2.28inch Upgrade Badge Maker Pin Maker Press Machine +400Pcs Button Parts

Total height (include the handle): 51cm (20). Photographic paper 128-138g/m2, no more than 157g/m2(34-40LB, no more than 41LB).

Multi purpose paper 70g/m2-85g/m2(18-22lb, 20lb is recommend). Machine net weight: 2.7Kg. This Orange Button Maker Machine is Aluminum Alloy Casting Solid Body, Different from the Ordinary Assembly Body, Precise Stainless Steel Mold Secure and Durable;The long Ergonomic Designed Steel Handle and Silicone Cover Offers a Comfortable Grip, Saving Energy & Time. How to Make a Button?

Q: Cannot make the button well, and the top and bottom do not match. A: Check the size of the up iron piece and back cover, make sure the up iron piece is a little bigger than the back cover.

Q: How to press the two molds when you make a button? A: When press mold A, you need to keep a distance, don't let the upper column through the hole, but when press mold B, please let the column through the hole until it completely closed. Q: What things need to attention when you install the mold of the machine? A: When you install the mold, the pin of the two sides must be installed, and when you installed the two sides must be pushed to the end, so that the upper and lower molds can be aligned. Q: How to solve the shell not fully crimping around the back?

A: When you press B mold, you must press slowly and hard until it to the end, and pauses two more seconds, then the buttons will be made very well. If the pressure is lighter, or lightly pressed, the mold will rebound quickly when it is closed, and it will easily fall off. This item is in the category "Crafts\Multi-Purpose Craft Supplies\Crafting Tools\Badge/ Button Makers". The seller is "toauto" and is located in this country: US. This item can be shipped to United States.

Brand: TOAUTO
Baseboard length: 29cm (11 ⅜”)
Baseboard width: 17cm (6¾”)
Total Height: 51cm (20”)
Net Weight: 2.7Kg
Color: Orange
Button Quantity: 400 Pcs
Model: 58mm 2.28 inch Button Maker